RE: new seqnum text; was ieee1904_3_D02_20151113_clean-seqnum-jik.docx
Yasser,
> -----Original Message-----
> From: Yasser Kilde Bajwa [mailto:Yasser.Bajwa@xxxxxxxxxxxx]
> Sent: Monday, November 23, 2015 1:09 AM
> To: Jouni Korhonen; stds-1904-3-tf@xxxxxxxx
> Subject: RE: new seqnum text; was ieee1904_3_D02_20151113_clean-
> seqnum-jik.docx
>
> Hi Jouni,
>
> I wonder about the reserved field in this proposal. It seems like it is implied
> that this is a static but configurable value. I just wonder which use this could
> be put to. The other option could of course be that we always make the
> upper sequence number counter field fill the remainder of the field. That
> would essentially just mean that these reserved bits always are 0.
[JiK:] I think it more like just setting an unused space to a known value. And setting it to any value is as easy as setting it to zeroes. We might find use for that are in the future as well.
>
> On another note, shouldn't we just call them the P counter and the Q
> counter? All the other names, Pmax, PVal etc. seem to make more sense like
> that. Perhaps even the P (Primary) and S (Secondary) counters.
[JiK:] Naming proposal sounds ok to me.
- JOuni
>
> Best regards
>
> Yasser Kilde Bajwa
> IP Core Product Manager
> MTI Mobile
> An MTI Company
>
> Krakasvej 17, 3400 Hilleroed, Denmark
>
> T: +886 908161200
> E: Yasser.Bajwa@xxxxxxxxxxxx
> W: www.mti-mobile.com / www.mtigroup.com
>
> -----Original Message-----
> From: stds-1904-3-tf@xxxxxxxx [mailto:stds-1904-3-tf@xxxxxxxx] On Behalf
> Of Jouni Korhonen
> Sent: 21. november 2015 06:39
> To: stds-1904-3-tf@xxxxxxxx
> Subject: new seqnum text; was ieee1904_3_D02_20151113_clean-seqnum-
> jik.docx
>
> Folks,
>
> For the next call some text proposals for the sequence number sub-clause.
>
> - Jouni
> === MICROELECTRONICS TECHNOLOGY INC. ===
> This message (and any attachments) may contain information that is
> confidential, proprietary, privileged or otherwise protected by law. The
> message is intended solely for the named addressee (or a person
> responsible for delivering it to the addressee). If you are not the intended
> recipient of this message, you are not authorized to read, print, retain, copy
> or disseminate this message or any part of it. If you have received this
> message in error, please destroy the message or delete it from your system
> immediately and notify the sender.